GE Healthcare · X-ray VascularInnova12001131200108
Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset.
Innova System boot failure
Symptom
Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset. Customer needs to boot again to recover. When Innova system has a actor issue.
Error message
error Code = 1200113, 1200108 error Text = ERR_DET_POWER_SUPPLY_BOOT_WARNING, debug Text += [DemSupervisor::_PWSStatusDebugMessage] Statuses are bad : (PG1B : OK) (PG2A : BAD) (PG2B : OK) (PG3 : OK) (PG1A : BAD)~ followed by error Code = 1200108 System impact: System boot failure. Displayed message : "Xray not available - Reset system; if problem persists, call Service". 1200108: Root Cause: Component(s) - Frontal Detector Power Supply This error is due to bad status sent by Frontal Detector Power Supply to Frontal RTAC Gitane. Recommended Action: Run RTAC subsystem//Front Detector Power Supply diagnostics 1200113: Root Cause: Component(s) - Frontal Detector Power Supply Warning This error is due to an unsucessful Detector Power supply boot attempt for frontal plane. Recommended Action: If the error is NOT repeated and NOT followed by a DetPS Boot Failure error, no Service recommended action
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Detector and Detector Power Supply Detector PS 2302361-2 for 21 cm detector, 2302361-3 (alt # 2300475-2) for 31/41 detector Detector PS 2302361-2 for 21 cm detector, 2302361-3 (alt # 2300475-2) for 31/41 detector
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.