GE Healthcare · MRExciteSigna
Linux xw8000 Hard Disk Drive SCSI Bus and Cable Physical Location Information.
Symptom
Need Linux xw8000 Hard Disk Drive SCSI Bus and Cable Physical Location Information See Long Description FE is replacing all three disk drives in the HP xw8000 Host PC and needs to know which hard disk drives go where and which SCSI data cables to connect and where to connect them, to the drives and to the PC mother board. Apparently he has no reference from the previous configuration on site and needs to look this up, but is unable to find it documented.
Applies to
- Models
- Excite, Signa
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.1 For product 1.5T Excite only. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.