GE Healthcare · MRExcite2254012
Unable to Download or Reset The TPS MGD or ISE Due to RRF Power supply.
Symptom
Fails TPS Reset when booting up to Applications or when Resetting TPS See Long Description When the MR system is booting up to applications it will fail TPS reset but Applications will successfully boot. With Applications up and "Reset TPS" has been selected, TPS fails to download successfully.
Error message
2254012 RRF-DIF Fiber Optic Link Error on the Master RRF-DIF board. 20 MHz Clock Present signal is in an Invalid State.-> See Long Description Extended Error: Check the Gigalink fiber optic connection between the IRF I/O and RRF-DIF Boards. If IT cables are connected and the system indicates that the 20MHz clock is missing then check the state of the voltage status LEDS on the rear of the Exciter Board. If any are not illuminated then check for missing voltages from the test points on the front of the RRF power supply modules
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.1 For product 1.5T Excite only. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Component
- 2292267 MGD RF Chassis 5 Volt Power Supply in front of MGD ----RF chassis -------
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.