GE Healthcare · CTOptimaVCTBrightSpeed260100042
Intermittent Scan Aborts when table is moving
Symptom
Intermittent Scan Aborts when table is moving between 1st and 2nd scouts, between helical series, or between axial series. Clicking Pause / Resume restarts scan. See long description for details. Intermittent Scan Aborts when table is moving between 1st and 2nd scouts, between helical series, or between axial series. The customer can click "Pause" and then "Resume" and continue scanning, after clicking "Resume or "Pause" it can take from 10 to 60 seconds before system will start scanning again.
Error message
Error: 260100042 Cradle was NOT ready See the long description for the full error code Tue May 17 16:02:03 2005 Error: 260100042 Host: tgp Process: tgp_subsys File: scHdwRdy.c Line: 70 Tue May 17 16:02:02 2005 Host : Table Gantry Processor Ermes # : 260100042 Exception Class : Soft Severity : Sec/Soft File : scHdwRdy.c Line# : 70 Function : No System Function Reported Scan Type : Scout Scan: 106/1/1 Cradle was NOT ready
Applies to
- Models
- Optima, VCT, BrightSpeed
- Product
- Optima CT660 10HW02.10.H40_P2_HS64_G_GMV 10HW33.8 H40_P2_HS64_G_GMV Optima CT660 Optima CT660 is a new design 64 slice scanner based on VCT and BrightSpeed technology. This is the first CT scanner as new Optima brand. check_config Product: Optima CT660 sw_version: 10HW02.10 or 10HW33.8 sw_hw_string: 10HW02.10.H40_P2_HS64_G_GMV or 10HW33.8_SP3-0-1.H40_P2_HS64_G_GMV host_id: 1943170864 tube_type: 19 gantry_type: GANTRY_HP_40 No. of processors: 8 Processor speed: 2527 memory: 24576 hinv CPU: GenuineIntel Intel(R) Xeon(R) CPU E5540 @ 2.53GHz 8 2527 MHz x86_64 Processors Secondary cache: 8192 KB FPU: GenuineIntel Intel(R) Xeon(R) CPU E5540 @ 2.53GHz Floating Point Main memory size: 24576 Mbytes SCSI controller 10: Version usb-storage Disk drive: unit 00 on SCSI controller 10, Lun 00 SCSI controller 9: Version usb-storage Disk drive: unit 00 on SCSI controller 9, Lun 00 SCSI controller 0: Version mptsas Disk drive: unit 00 on SCSI controller 0, Lun 00 Disk drive: unit 01 on SCSI controller 0, Lun 00 16550A UART serial port: 000003F8 Graphics board: VGA Ethernet interface configured: eth3 Ethernet interface configured: eth0 Ethernet interface configured: eth1 Dual Channel Display Table weight limit: GT1700V Table The Lite table ( currently for Japan Market) 450 Pounds (205 kg) Table: The normal table is 500 Pounds (227 kg) Table: X-Ray Tube Modified Performix D3187T Green Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 5122207-2 ABSOLUTE ENCODER FOR CRADLE GT (replaces 5122207) See long description for details Part #: 5122207-2 ABSOLUTE ENCODER FOR CRADLE GT (replaces 5122207) Part Type: GP CONSUMABLES Part Weight: 2.18 LBR Repairable: No Returnable: No Hazardous Material: N Description: ABSOLUTE ENCODER FOR CRADLE GT FRU: Yes Status: Orderable Comments: This part is used in GT-1700mm and GT-2000mm tables. Not Available
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required