GE Healthcare · X-ray VascularInnova
Innova, Warning message pops up on Live Monitor during DSA mode.
Symptom
Innova, Warning message pops up on Live Monitor during DSA mode. Depending on acquisition parameters computation and available heat units. System will display a Warning pop up on the Frontal Live Monitor during DSA mode. Depending on acquisition parameters computation and available heat units. System will display a warning pop up on the Frontal Live monitor during DSA mode. The computed available run time is displayed and a 5 second count starts to let the user take the decision to perform or not the acquisition.
Error message
Warning message pops up on frontal live monitor Warning message pops up on live monitor
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.