GE Healthcare · X-ray VascularInnova10500421050034
181783 Positioner Error Reset System is displayed on the in room monitor.
Symptom
Positioner Error Reset System is displayed on the in room monitor.
Error message
INX1: 1050042 Larm AXIS POWER vinputNotDetected 1050042 Larm AXIS POWER WR GantryAxis No Motion Larm_AXIS_POWER 0 0 - vinputNotDetected Z:/heroic/motion_control_task.c 4163 1050034 Larm AXIS CONTROL LOOP Intermittent Motion stop - overCurrentDcBus 1050034 Larm AXIS CONTROL LOOP DO GantryAxis Intermittent Motion stop Larm AXIS CONTROL LOOP 0 0 - overCurrentDcBus Z:/heroic/motion control task.c 3794
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.