Unable to start Medical Application package on DL
Symptom
INX1PRO-IQ+: Table height displays > 99 at boot, even if rotation is set off afterwards When system is booted with table top rotation off centered, then on IRD Table height displays > 99, preventing MED apps (QCA/QCA) to be started. This display remains, even if rotation is set off afterwards, only cleared by System Reset. When System is booted with table top rotation off centered, then on IRD Table height displays > 99, and Table Tilt displays > 99 (even with Omega Table), preventing MED apps (QCA/QCA) to be started. The usual "workaround" to set rotation off ( back to center ) does not work. The only way to clear the issue is System Reset or Shutdown.
Error message
1050188 TBLROT ENC FAILURE DO Table Speed Degraded Frt_TBLROT_ENC_FAILURE- Table rotation encoder failure encoder not calibrated (T:0x4B13 H:0x000B U:0x0001) 1050188 TBLROT ENC FAILURE DO Table Speed Degraded Frt_TBLROT_ENC_FAILURE 0 0 - Table rotation encoder failure encoder not calibrated (T:0x4B13 H:0x000B U:0x0001) Z:/heroic/table_rotation.c 238 This error can be generated due to the rotational encoder never being calibrated. As a side effect, this error may be followed by many errors 810012 Front: Invalid parameter received DO Debug: (null) (after a record acquisition for example).
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Software
- $INX1PRO or IQ+, Pathfinder M3b, DL_PATHFINDER_2.17.1 $INX1PRO or IQ+, Pathfinder M3b, DL_PATHFINDER_2.17.1 $INX1PRO or IQ+, Pathfinder M3b, DL_PATHFINDER_2.17.1
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.