GE Healthcare · X-ray VascularInnova36020123602010
Communication Failure: Retry and if problem persists Reset System is displayed on the Innova Monitor.
Communication Failure
Symptom
Communication Failure: Retry and if problem persists Reset System is displayed on the Innova Monitor. Heat units 0 Communication Failure: Retry and if problem persists Reset System is displayed on the Innova Monitor. Xray is inhibited. Jedi issue, Heat units zero
Error message
INX100: 3602012 Generator communication failed followed by 3602010 generator reset detected outside boot state 3602012 AR XRTechMgr Generator communication failed Debug: [XRTechMgr::_gapStopExposureSequence] timeout on synchro, runId=174, GAP state=EXPOSURE, opModeId=1, frameId=136, kVp_actual=75.8000, mAs_actual=1.0242, pw_actual=9.9800 3602010 IH XRTechMgr Generator not started. Generator switched off Debug: [XRTechMgr::notifyGeneratorReset] generator reset detected outside boot state. Error reported
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Innova Jedi Innova Jedi Innova Jedi
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.