181341 Innova Gantry Moving Slow, Beeping sound coming from TSSC when moving Gantry

Symptom

Error message

1050302 DO GantryAxis EM_ANT_CINEMATIC_ERROR_TBL_LAT Debug: - ANTICOLLISION CINEMATIC ERROR (0x4B10 HW:0x0009 and US:0x8000), speed error on table lat 1050302 DO GantryAxis EM_ANT_CINEMATIC_ERROR_TBL_LAT Debug: - ANTICOLLISION CINEMATIC ERROR (0x4B10 HW:0x0009 and US:0x8000), speed error on table lat

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Omega V Table Omega V Table Omega V Table Innova 2100–IQ Case Innova 2100–IQ System can be supplied with an OMEGA IV Compact patient table, an OMEGA V long patient table, which includes a table side control with Contour Filter, or a InnovaIQ patient Table. Innova 3100/3100-IQ and 4100/4100-IQ Case Innova 3100/4100 Systems can be supplied with an OMEGA V Long patient table or InnovaIQ patient Table, which includes a table side control with Contour Filter. Illustration 2-1: Omega patient table (with TSSC)

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.