Collision/patient fall risk.
Symptom
INX100, INX1X1: Collision/patient fall risk. Alarm system failure. Move with care (2.1) is displayed on the live monitor INX100, INX1X1 !! Collision/patient fall risk. Alarm system failure. Move with care (2.1) is displayed on the live monitor. System impact: X-rays are not allowed. INX100, INX1X1: !! Collision/patient fall risk. Alarm system failure. Move with care (2.1) is displayed on the live monitor. System impact: X-rays are not allowed. DL application error message 62249. Note: For biplane system, this message will be displayed on frontal live monitor in case problem is linked with frontal plane.. If problem is related to lateral plane, error message "Xray not available - Reset system; If problem persists, call Service" will be displayed on lateral live monitor.
Error message
error Code = 600105 (FRT) and/or 700105 (LAT), error Text = ARCNET Communication Failure , debug Text /= Null , recovery Class = IH, major Function /= XRBeamForm Error Code = 600105 (FRT) and/or 700105 (LAT), error Text = ARCNET Communication Failure , debug Text /= Null , recovery Class = IH, major Function /= XRBeamForm System impact: X-ray and Gantry motion unavailable. Error Code = 1000025, error Text = ARCNET Communication Failure, debug Text = Positioner link disconnected, recovery Class = IH, major Function /= XRImChainPos Error Code = 1000025, error Text = ARCNET Communication Failure, debug Text = Positioner link disconnected, recovery Class = IH, major Function /= XRImChainPos. System impact: X-ray and Gantry motion unavailable. Displayed message : "Xray not available - Reset system; if problem persists, call Service".
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.