GE Healthcare · MRExcite
Patient Alarm squeeze ball is not working Due to No Power to Patient Alert Box.
Symptom
The Patient Alarm Box is not working and its light is out. The tech has unplugged and plugged the power back into the control box but it hasn't fixed the problem.
Applies to
- Models
- Excite
- Product
- Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only
- Software
- HDe 15.0 For Hino Excite HDe 15.0 systems only.
- Component
- 46-317758P20 Patient ALARM UNIT CONTROL see long description 46-317758P20 ALARM UNIT CONTROL Note: ALARM UNIT CONTROL BOX WITH PRESSURE RELIEF ADAPTOR. REPLACES 46-317758P7 PER PCN 207481, WHICH HAD NO PRESSURE RELIEF ADAPTOR (46-317758P19),PER JOHN PRENDERGAST. MS7093 2-14-00 46-317758P3 MAGNACOUSTICS 12V 60HZ POWER SUPPLY This is the AC adapter used to power the Patient Alarm Box. This is the AC adapter used to power the Patient Alarm Box.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.