Innova System would not power up.
Symptom
Innova System would not power up. Customer complains the VCIM will not turn on. With UPS, VCIM does not turn Innova ON and 20KVA UPS does not turn ON Innova System would not power up. Customer complains the VCIM will not turn on. With UPS,VCIM does not turn Innova ON and 20KVA UPS does not turn ON. The Main CB1 in the PDB immediately shuts down when the VCIM or the green power on button on the PDB is pressed. Intermittent. Innova System would not power up. Customer complains the VCIM will not turn on. With UPS,VCIM does not turn Innova ON and 20KVA UPS does not turn ON The Main CB1 in the PDB immediately shuts down when the VCIM or the green power on button on the PDB is pressed. Intermittent.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- UL PDB (cat 450xx) UL PDB UL PDB
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.