GE Healthcare · X-ray VascularInnova3002220056
Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor.
Symptom
Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor. Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Monitor.
Error message
30022: POWER UNIT : EXCESSIVE CURRENT ON INV B: 20056: ECM : POWER UNIT IN RESET STATE DUE TO ERROR> AR: ECM: HWStatus=0017 User=0000 0000 42C7. 20056: ECM : POWER UNIT IN RESET STATE DUE TO ERROR: AR: ECM: HWStatus =0001 User=0000 0000 4260 30022 Power Unit : Excessive Current on Inverter B is referring to the Filament drive Inverter not the HV Inverter. See LD for complete error 30022: POWER UNIT : EXCESSIVE CURRENT ON INV B: AR: ECM: HWStatus=0017 User=0000 0000 42C7. 20056: ECM : POWER UNIT IN RESET STATE DUE TO ERROR: AR: ECM: HWStatus =0001 User=0000 0000 4260 30022 Power Unit : Excessive Current on Inverter B is referring to the Filament drive Inverter not the HV Inverter.
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Advantx-E VAMP Advantx-E VAMP Advantx-E VAMP
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.