GE Healthcare · X-ray VascularInnova50110
When driving the Detector Lift the SID changes to or stays on 118 cm
Symptom
When driving the Detector Lift the SID changes to or stays on 118 cm When driving the Detector Lift the SID changes to 118. Fluoro is inhibited until you drive the Lift to Max SID using the emergency backout. When driving the Detector Lift the SID changes to or stays on 118 cm. Fluoro is inhibited until you drive the Lift to Max SID using the emergency backout.
Error message
50110POS : LIFT SMA: OVER CURRENT ERROR HWStatus= 0003 4ABB 50110 DO POS POS : SMA: OVER CURRENT ERROR Debug: fct-status=0 hw-status=3 pos-error=4abb usr-status=100 HWStatus=0003 User=0000 0100 4ABB
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry Detector Lift Assembly Detector Lift Assembly Detector Lift Assembly
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.