GE Healthcare · X-ray VascularInnova1050214
178918 INX100, !Unintended Motion Risk.
Symptom
INX100, !Unintended Motion Risk. Motion Command Failure. Move carefully. The DL image monitor displays !Unintended Motion Risk. Motion Command Failure. Move carefully. The system has detected a permanent enable/motion on the TSUI joystick. Gantry may be locked up, reset to recover.
Error message
1050214 SLAVE SH LARM TOGGLE CALIB; SH Slave Larm toggle calib 1 0 - L arm joystick miscalibration failure 1050214 SLAVE SH LARM TOGGLE CALIB WR PosUserInterface No Boot SH Slave Larm toggle calib 1 0 - L-arm joystick miscalibration failure The system has detected the L-ARM joystick is not returning the expected value. Message on DL image review monitor: Smart Handle problem Call Service.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.