Communication Failure: Retry and if problem persists Reset System is displayed on the Innova Monitor.

Symptom

Error message

3602012 Heat units (zero 0), Generator Communication failed: AR: Component(s)_RTAC_Jedi_link: Timeout during the power-up of the generator Xray aborted by 3602012 Generator communication failed Debug:timeout when configuring the generator. This error may be followed by mulitple other errors 3800341unable to start the exposure sequence when the generator is not configured, 200205 Unexpected sequencing, 3800341Thermal log - Prediction result not available or out of range Xray aborted by 3602012 Generator communication failed Debug :timeout when configuring the generator. This error may followed by mulitple other errors 3800341 unable to start the exposure sequence when the generator is not configured, 200205 Unexpected sequencing, 3800341Thermal log - Prediction result not available or out of range Also since there is no generator communication, the system should display Xray not Available, and the Heat units for the tube will be 0%.

Applies to

Models

Innova

Product

Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Innova Jedi Innova Jedi Innova Jedi

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.