Bolus would set up and perform the mask exposures.
Symptom
INX100: Bolus run aborted: Bolus would set up and perform the mask exposures. At the end of the mask exposures it would abort.. Bolus run aborted: Bolus would set up and perform the mask exposures. At the end of the mask exposures it would abort. # 2. Issue: The Innova aborts at the beginning of the Mask run with error 1200021, TRIG received while no PRETRIG has been received yet! LastFrameId=0, on the first Bolus chase of the day after system power off Bolus run aborted: Bolus would set up and perform the mask exposures. At the end of the mask exposures it would abort. #2 issue, The Innova aborts at the beginning of the Mask run with error 1200021, TRIG received while no PRETRIG has been received yet! LastFrameId=0, on the first Bolus chase of the day after system power off
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.