GE Healthcare · X-ray VascularAdvantxInnova
TSUI are not working at table side.
TSUI are not working
Symptom
TSUI are not working at table side. No gantry motion from smart handle (or smart box). The TSSC is blank (all leds off). TSUI are not working at table side. No gantry motion from smart handle (or smart box). The TSSC is blank (all leds off).
Error message
ADX: 4B07 Smart Handle Problem Call Service . ADX: 4B07 Smart Handle Problem Call Service May have HW HW:0101. ADX: 4B07 Smart Handle Problem Call Service HW:0101. Description: A permanent command is detected on one axis of the smart handle A or B. The actual error is described by means of the HW status word. When multiple errors occur nearly simultaneously, two or more of these status words will be logically “OR–ed” together to form a single error condition identifier. HW 0101 = Smart Handle A side lever
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.