GE Healthcare · MRExciteSigna11017
Unable to Network to PACS Due to 8 Port Ethernet Switch Hub.Cannot Move or Transfer Images on DICOM Network.Replace the…
Unable to Network to PACS Due to 8 Port Ethernet Switch Hub.Cannot Move or Transfer Images on DICOM Network.Replace the 8 Port Ethernet Switch Hub Inside the GOC. wqr.Excite.11017 Failure to deinit DC…
Symptom
Cannot Move or Transfer Images on DICOM Network Cannot Move Images on DICOM Network
Error message
11017 Failure to deinit DCM DCM has not been initialized (101)
Applies to
- Models
- Excite, Signa
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.1 For product 1.5T Excite only. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Component
- 2272740-3 8 PORT 10/100 INTEL HUB SERVICE KIT 2272740-3 8 PORT 10/100 INTEL HUB SERVICE KIT.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.