GE Healthcare · MR
Vessel pressure is low due to a magnet quench.lcc_hmi2 alarm I2 - HePressure Low.Perform Quench Recovery and submit a Qu…
Vessel pressure is low due to a magnet quench.lcc_hmi2 alarm I2 - HePressure Low.Perform Quench Recovery and submit a Quench Report-wqr.Magnet LCC_HM
Symptom
lcc_hmi2 alarm I2 - HePressure Low lcc_hmi2 alarm I2 - HePressure Low, the Helium Vessel Pressure has become lower than the lower limit alarm setting on the Magnet Monitor 3.
Error message
lcc_hmi2 alarm I2 - HePressure Low lcc_hmi2 alarm I2 - HePressure Low, the Helium Vessel Pressure has become lower than the lower limit alarm setting on the Magnet Monitor 3.
Applies to
- Product
- Magnet LCC_HM Magnet LCC_HM is a LCC short bore 1.5 T magnet. The foot print of the magnet is different than a normal LCC magnet. User should reference the installation manual "Direction 5500108, 1.5T & 1.0T LCC and MR450 Magnet Delivery & Installation. LCC_HM magnet profile must be selected in the MM3 with 1.62 or greater software.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.