GE Healthcare · X-ray VascularInnova3800319
Fluoro oscillation after Interface #2 board replaced on MPPU generator.
Symptom
Fluoro oscillation after Interface #2 board replaced on MPPU generator.
Error message
3800319 Regulation on Sensor Feedback cannot be achieved The Regulation on Sensor Feedback message is the detector ABC window did not have the correct value. Could be the System exposure was at MAX MA in Fluoro and the ABC value was low. The next exposure may be ok
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.