GE Healthcare · X-ray VascularInnova36020833702083
Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
Symptom
INX100: Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor. Cooling Failure; Shut System down and call Service is diaplayed on the Innova Image monitor
Error message
3602083 Tube Chiller Serial Communication Failure. The System is not communicating with the Xray tube chiller. When there is a chiller alarm, The Chiller alarm sounds, but the chiller is unable to communicate the error to the System. Note: for biplane, 3602083 refers to frontal chiller. Error 3702083 refers to lateral chiller. Troubleshooting steps are indentical. 3602083 Tube Chiller Serial Communication Failure. The System is not communicating with the Xray tube chiller. When there is a chiller alarm, The Chiller alarm sounds, but the chiller is unable to communicate the error to the System.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Coolix XR Tube Chiller Coolix XR Tube Chiller Coolix XR Tube Chiller
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.