GE Healthcare · MR
Compressor Will Not Start Up.
Symptom
Magnet Shield Cooler Compressor is not running. Magnet Shield Cooler fails to start up. Magnet Shield Cooler Compressor is not running. Magnet Shield Cooler fails to start up.
Applies to
- Product
- Magnet Compressor Sumitomo. Parts information can be found in the Long Description. Static Pressure Dual Stage (4k):232 to 239 psig (16.3 to 16.8 kgf/cm^2)(1.6 to 1.65 MPa) Static Pressure Single Stage (HFO) and 10K:210 to 217 psig (14.8 to 15.3 kgf/cm^2)(1.45 to 1.50 MPa) Dynamic Pressure:319 to 333 psig (21.4 to 23.5 kgf/cm^2)(2.10 to 2.30 MPa) Compressor H2O Cooled 10K: 2188440-2 changed from T3487RT Compressor H2O Cooled 4K: 2188440-2 changed from T3487RT Compressor Air Cooled 4K: 2166592 changed from T3487RY Adsorber: 2172241 Supply Line 20M: 2154502-2 changed from T3487RJ Return Line 20M: 2154505-2 changed from T3487RK Supply Line 6M: * NO LONGER EXISTS IN ePDM , (Jim Cox 10/5/2007)* T3487RL Return Line 6M: 2154505 changed from T3487RM Static Pressure Dual Stage (4k):232 to 239 psig (16.3 to 16.8 kgf/cm^2)(1.6 to 1.65 MPa) Static Pressure Single Stage and 10K:210 to 217 psig (14.8 to 15.3 kgf/cm^2)(1.45 to 1.50 MPa) Dynamic Pressure:319 to 333 psig (21.4 to 23.5 kgf/cm^2)(2.10 to 2.30 MPa)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.