GE Healthcare · MRExciteSigna2224842
The Home Flag on the Longitudinal Drive Belt was not passing through the Home Flag Detect Optical Coupler.
Symptom
The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered See Long Description The carriage fails to advance to meet the table when it is raised, and fails to retract when it is undocked or lowered. But the customer can manually attach the cradle to the carriage and then table operation is normal driving in and out and they can scan okay. There are no error messages logged.
Error message
2224842 SRI Hardware Error Unexpected cradle motion. Thu Jun 9 13:59:11 2005 Error: 2224842 Host: MR_PHC Process: NSP File: HPC_PORT_ID:sri Line: 99 SRI Hardware Error: Unexpected cradle motion. This error would occur if the table were moved by hand. Please run SRI diagnostics if that is not the case. Expected Cradle Velocity: -100 mm/sec Measured Cradle Velocity: 189 mm/sec
Applies to
- Models
- Excite, Signa
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.1 For product 1.5T Excite only. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Component
- 46-282436P1 CARRIAGE TRAVEL SENSOR FLAG If the screws are broke or missing you will need two of them to hold the flag onto block. 46–265486P8 SCREW If the screws are broke or missing you will need two of them to hold the flag onto block. 46–265486P8 SCREW.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.