GE Healthcare · X-ray VascularInnova
Acquisition (Fluoro or Record) does not start
Symptom
INX1PRO-IQ+: Acquisition (Fluoro or Record) does not start INX1PRO-IQ+: Acquisition (Fluoro or Record) does not start. Either in application or during calibrations. In application, no record either from console handswitch or footswitch. No fluoro from footswitch. In calibration (for example detector calibrations), acquisitions when requested do not start (either from console handswitch or footswitch) and there is no error message displayed.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.