The Download Of A Prescribed Series Failed due to 2nd RECEIVER II Board in RRF Chassis.

Symptom

Error message

2248121 APS failed to send command message to DRF 40 DRF might have crashed because of other errors. Please perform a TPS Reset.-> See Long Description 2248121 MR3T NSP APS:DrfDriver::sendCmdMsg 1068 APS failed to send command message to DRF 40 DRF might have crashed because of other errors. Please perform a TPS Reset.-> Extended Error: The reset should clear the hardware. If not, run the MGD Board Level and Datapath diagnostics. Also, try reseating the boards listed below. Possible cause(s): Software,

2248152 During receiver calibration, the operation to calibrate ADC offsets failed. The function, getOffsets() failed. A TPS reset may be necessary-> See Long Description 2248152 MR3T NSP APS:RrfCalibrator::rcvCal 349 During receiver calibration, the operation to calibrate ADC offsets failed. The function, getOffsets() failed. A TPS reset may be necessary-> Extended Error: The reset should clear the hardware. If not, run the RRF Board Level and Datapath diagnostics. Also, try reseating the boards.

2248239 ADC Offsets Calibration Validation Failed. The Acquired ADC Offsets are out of Tolerance for the Following Receivers. ADC offsets calibration validation failed. The acquired ADC o

Applies to

Models

Excite

Product

3T Excite HD 12.0 software only

Software

12.0 Excite HD and 3T Excite HD products only

Component

2349808-2 NMR Receiver II EMC ED2 Compliant 2349808-2 NMR Receiver II EMC ED2 Compliant

Area

MR

Related GE Healthcare MR issues

• TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
• The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
• Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
• CWA ID100315. Auto and Manual Prescan Fails.
• Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
• A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.