GE Healthcare · X-ray VascularInnovaAdvantx1050610
The image monitor displays the error message
Symptom
Detector collision not cleared, Please clear collision or call service The image monitor displays the error message: Detector collision not cleared, Please clear collision or call service
Error message
1050610, error Text = LAT DETECTOR COLL NOT CLEARED, debug Text = - LAT DETECTOR COLLISION NOT CLEARED. CONTINUE WITH CAUTION (T:4A14). In MP_SetCollisionNotClearedMsgOnIRM, recovery Class = WR, major Function /= GantryAxis System impact: Half speed until system detector level1 collision is cleared. Displayed message : "Detector collision not cleared. Please clear collision or call Service.".
Applies to
- Models
- Innova, Advantx
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.