GE Healthcare · X-ray VascularInnova10703855184194212002218
TSSC Failure.
166213 TSSC Failure.
Symptom
TSSC Failure. Call Service is displayed on the Innova review monitors.
Error message
INX100: 1070385 TSSC button on port 1 is in pressed condition for more than 15 seconds. ELEGANCE 1070385 TSSC button on port 1 is in pressed condition for more than 15 seconds WR PosUserInterface TSSC 5184194-FRU-TSSC 0 0 - ELEGANCE ERROR FOUND : Long description has Debug bit code 1070385 TSSC button on port 1 is in pressed condition for more than 15 seconds WR PosUserInterface TSSC 5184194-FRU-TSSC 0 0 - ELEGANCE ERROR FOUND Refer to Debug text process TSSC Button Error, raise of error : EM_TSSC1_BUT_STUCK_ERROR ID=XX XX is the code number for the TSSC button that is stuck. See codes below Button Code Button information 01 filter left 02 filter right 03 filter center 04 CF autoformat 05 Spare 06 spare 07 coll autoformat 08 Flouro Sub 09 fluoro detail selection 0A Fluoro store 0B Pref. 0C Timer reset 0D frontal FOV increase 0E frontal FOV decrease 0F lateral FOV (landscape) increase 10 lateral FOV (landscape) decrease 11 room light 12 Spare (previously used for lat tube) 13 test 14 Start/End 15 Table rotation lock 16 Table panning lock 17 emergency status 18 Spare (previously used as park) 19 Spare (previously used as prior) 1A Spare (previously used as Next) 21 Operator decrease
Applies to
- Models
- Innova
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- $ IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.