GE Healthcare · MRSignaOvationExcite22275562237285223727322238482237297
CWA Unable to Download or Reset The TPS MGD or ISE.
Symptom
Unable to Download or Reset the TPS MGD or ISE Unable to download TPS or ISE or MGD chassis
Error message
2227556 *** Reset/Download TPS was not successful. *** 2227556 sdm sdm_main.c 320 *** Reset/Download TPS was not successful. *** 2237285 CERD BOOT FAILURE Unable to load software to the CERD board. 2237285 Host: TSMR Process: NSP File: TPS:cx_init.c Line: 117 CERD BOOT FAILURE Unable to load software to the CERD board. 2237273 CERD BOOT ERROR CERD boot software on TPS timed out while waiting for a response from the CAP. Host: lx-bay14b Proc: NSP Error: 2237273 File: TPS:cx_dpr_utils.c Line: 196 CERD BOOT ERROR CERD boot software on TPS timed out while waiting for a response from the CAP. IT MAY BE NECESSARY TO CYCLE POWER ON THE ISE CHASSIS TO CLEAR THIS CONDITION. timeout duration = 100 2223848 TPS boot status packet has non-zero value. ermes is -1. Host: lx-bay14b Proc: NSP Error: 2223848 File: TardisReset.m Line: 1176 TPS boot status packet has non-zero value. ermes is -1. 2237297 CERD BOOT ERROR The CERD did not respond to a boot command in the allotted time. Host: lx-bay14b Proc: NSP Error: 2237297 File: TPS:cx_dpr_utils.c Line: 113 CERD BOOT ERROR The CERD did not respond to a boot command in the allotted time. CERD command : 32 response time : 100
Applies to
- Models
- Signa, Ovation, Excite
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.