Firewall configuration failure in SUIF
Symptom
INX1PRO-IQ+: Firewall configuration failure in SUIF INX1PRO-IQ+: Firewall configuration failure in SUIF. Start the firewall configuration tool from SUIF as indicated in the Firewall configuration job card. At the end of the procedure, a failure message is displayed telling that firewall configuration was unsuccessfull. INX1PRO-IQ+: Firewall configuration failure in SUIF. Start the firewall configuration tool from SUIF as indicated in the Firewall configuration job card. Fill in all IP adresses as required by the tool then click on "start" configuration button. At the end of the procedure, a failure message is displayed telling that firewall configuration was unsuccessfull.
Applies to
- Models
- Innova
- Product
- X Innova 2100 Do not use Innova 2100iq System Innova 2100
- Software
- $INX1PRO or IQ+, Harmony M4 HP2 or Harmony HP1 FMI12144 $INX1PRO or IQ+, Harmony M4 HP2 or Harmony HP1 FMI12144. Note: HP2 software release is equivalent to HP1 software release + gantry vibration fix for Harmony M4 forward production $INX1PRO or IQ+, Harmony M4 HP2 or Harmony HP1 FMI12144 Note: HP2 software release is equivalent to HP1 software release + gantry vibration fix for Harmony M4 forward production.
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.