GE Healthcare · MR
SRI Functional Tests Magnet Enclosure Button Test on HFO3 fails all buttons, no numeric display or count or error in log…
SRI Functional Tests Magnet Enclosure Button Test on HFO3 fails all buttons, no numeric display or count or error in log due to defective diagnostic.
Symptom
SRI Functional Tests Magnet Enclosure Button Test on HFO3 fails on all buttons. No action on the magnet numeric display or errors in GE_Sys log when buttons on the left and right control pads are pressed.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.