Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset.

Symptom

Error message

Error Code = 3602010 (FRT) or 3702010 (LAT), error Text = Generator not started. Generator switched off, debug Text = [XRTechMgr::initActor] dont allow the acquisition until the generator is powered up, recovery Class = IH, major Function /= XRTechMgr Note: May be followed by error 3602012 (3702012) AR XRTechMgr Frt (Lat): Generator communication failed Debug: Timeout during the power-up of the generator. Error Code = 3602010 (FRT) or 3702010 (LAT), error Text = Generator not started. Generator switched off, debug Text = [XRTechMgr::initActor] dont allow the acquisition until the generator is powered up, recovery Class = IH, major Function /= XRTechMgr Note: May be followed by error 3602012 (3702012) AR XRTechMgr Frt (Lat): Generator communication failed Debug: Timeout during the power-up of the generator.

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Positioner Gantry Positioner Gantry Positioner Gantry

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.