GE Healthcare · X-ray VascularInnovaAdvantx1200011
System can't boot up with error 4F2E Reports on Advantx Console; message "Xray not available; Reset system to recover; X…
System can't boot up with error 4F2E Reports on Advantx Console; message "Xray not available; Reset system to recover; Xray; Call Service" display on console
Symptom
System can't boot up with error 4F2E Reports on Advantx Console; message "Xray not available; Reset system to recover; Xray; Call Service" display on console
Error message
IN2k: 1200011 ERR C80 POWERUP TEST RTAC C80 Boards 1 0 DMA transfer Failed on IP3 1200011 ERR C80 POWERUP TEST IH XRImDet DSP init Component(s) RTAC C80 Boards 1 0 DMA transfer Failed on IP3 dsp diag.cpp 427
Applies to
- Models
- Innova, Advantx
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Software
- $, Innova 2000 Service Pack FMI F4, HerSvcPack_2.02 HerSvcPack_2.02 DL Applications version 11.23.26 Ghost DL-1 "F" : 17.4 Ghost DL-1 "G" : 15.5 Ghost DL-2 : 16.4 Ghost DL-4 : NA DL : 11.23.26 DL Atlas Core : 3.1O-1 RTAC Atlas Core : 3.1O-2 IDC : 2.13 Calypso : 11.13_FMI_7 Calypso Uptime : 11.25_FMI Titan : H0.57 Pos. Motorola : 5.2Y3-2 Pos. Roadrunner : 5.0R
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.