GE Healthcare · X-ray VascularInnova1050263105026210502611050260
ID161776 Innova; Table and Gantry will not move by any control.
Symptom
Innova; Table and Gantry will not move by any control. Table and Gantry cannot Move, TSSC prd display: BD Innova; Table and Gantry will not move by any control.
Error message
Errors indicate that all limit switches are engaged Errors indicate that all limit switches are engaged, 1050263 FRT LIFT AXIS SWITCH ENGAGED, 1050262 FRT CARC AXIS SWITCH ENGAGED, 1050261 FRT PIVOT AXIS SWITCH ENGAGED, 1050260 FRT LARM AXIS SWITCH ENGAGED
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.