GE Healthcare · X-ray VascularInnova50118
The Table top locks do not engage, the table is floating.
Symptom
The Table top locks do not engage, the table is floating.
Error message
error Code = 50118, error Text = POS Table: Encoder, potentiometer failure, debug Text += pos-error=4AC3, recovery Class = DO, major Function /= LC Gantry System impact: Degraded table motion. Displayed message : None. Status in error debug text. (0:Longitudinal, 1:Lateral, 2:Heighth, 8:PIB) error Code = 50118, error Text = POS Table: Encoder, potentiometer failure, debug Text += pos-error=4AC3, System impact: Degraded table motion. Displayed message : None. Hardware codes associated with this error: 0x0000 HW_TBL_LONG - Longitudinal Table 0x0001 HW_TBL_LAT - Lateral Table 0x0002 HW_TBL_HEIGHT -Table Height 0x0008 HW_PIB - PIB
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- TABLE PANNING DEVICE HANDLE 5193544 (3m) or 5180669 (5m) TABLE PANNING DEVICE Handle. Panning Handle replacement FRU number is # 5193544 (3m cable) or # 5180669 (5m cable) TABLE PANNING DEVICE Handle. Panning Handle replacement FRU number is # 5193544 (3m cable) or # 5180669 (5m cable)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.