IQ+ or PRO table, Table Operation Degraded; Call service is displayed on the monitor.

Symptom

Error message

1070334 Zero position FB 1070384 Table operation degraded FB 1070383 "Bolus function is not available 1070334 Zero position detected but tilt axis horizontal switch press not detected DO table Table axis TSG0076-SN_limit_switch_cable troubleshooting. Followed by: 1070384 Table operation degraded following table failure WR Table control Software Followed by: 1070383 "Bolus function is not available, due to table degraded mode" DO Table axis Longi motion Software_Problem

Applies to

Models

Innova

Product

Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

InnovaIQ (pro) Table with Tilt, Elegance InnovaIQ Table with Tilt, Elegance InnovaIQ Table with Tilt, Elegance InnovaIQ Table is a fully motorized tilting table for Innova® cardiovascular and interventional X-ray angiographic systems.

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.