GE Healthcare · X-ray VascularInnova
Temperature or Humidity of the technical room out of range
Symptom
Temperature or Humidity of the technical room out of range Technical Room temperature goes below +10°C (50°F) or over +35°C (+95°F). Technical Room Humidity goes below 30% or over 75% Always use the most appropriate documentation for your system. The following was taken from Direction PIM 5160944-2-100 Rev1 and is provided for your reference: Technical Room temperature goes below +10°C (+50°F) or over +35°C (+95°F) Technical Room Humidity goes below 30% or over 75%
Error message
No error code for that issue, not located in the SUIF error.log. Reported by T_H_report.txt file in the DL.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.