GE Healthcare · MR
DEFECTIVE CTL SPINE COIL CONNECTOR.
Symptom
Intermittent Signal Drop off or loss on the CTL Coil The problem happens with HFO3 M3 and M4 software. Only the Thoracic and Lumbar are affected. The affected images look noisy.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 2419602 0.7T CTL ARRAY COIL, W/CABLE 2419602 0.7T CTL ARRAY COIL, W/CABLE .
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.