INX100, Collimator will move in but cannot move out or Collimator is not working properly, blades close and drive into t…
INX100, Collimator will move in but cannot move out or Collimator is not working properly, blades close and drive into the FOV without being requested to move by the operator
Symptom
INX100, Collimator will move in but cannot move out or Collimator is not working properly, blades close and drive into the FOV without being requested to move by the operator INX100, Collimator will move in but cannot move out or Collimator is not working properly, blades close and drive into the FOV without being requested to move by the operator. Collimator reset not working on TSSC.
Error message
600603: Collimator debug message ; continue Collimator General invalid data 600603 Collimator debug message ; continue Collimator General invalid data Found in Innova error log
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.