GE Healthcare · X-ray VascularInnova107067051615565161489
Elegance table won't move up or down
Symptom
Elegance table won't move up or down Elegance table won't move up or down.
Error message
Error 1070670 PRD Error: No release Brake Fault on table lift axis Error 1070670 PRD Error: No release Brake Fault on lift axis error 1070670, PRD Error: No release Brake Fault on lift axis TSG0071-SN_cable_brakes troubleshooting 5161556-FRU-Servo Node 5161489-FRU-Lift Axis Drive Assy
Applies to
- Models
- Innova
- Product
- X Innova 2100 Do not use Innova 2100iq System Innova 2100
- Software
- $ IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.