IN2K, Intermittent Horizontal Line Artifact, lines would appear in fluoro and record.
Symptom
IN2K, Intermittent Horizontal Line Artifact, lines would appear in fluoro and record. Intermittent Horizontal Line Artifact. It would occur when the Gantry CARC was angulated greater than 35 deg Caudal. Both errors would occur and the horizontal lines would appear in fluoro and record until the gantry was moved back to less than 35 deg Caudal. See LD for complete error. Intermittent Horizontal Line Artifact. Errors 50129/50128 POS : Call Service; gantry failure HWStatus=0000 User=0000 001B 4ACE / HWStatus=000A User=0000 0000 4ACD. Problem was intermittent. It would occur when the Gantry CARC was angulated greater than 35 deg Caudal. Both errors would occur and the horizontal lines would appear in fluoro and record until the gantry was moved back to less than 35 deg Caudal.
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.