Error 4F76, Xray Abort Reposition Collimator Blades

Symptom

Error message

error Code = 50105, error Text = POS SMA: Extra course switch engaged or 24V failure, debug Text += pos-error=4AB6, recovery Class /= WR, major Function /= VAS / POS: HW code 0000 = LARM 0001 = Pivot 0002 = ARC 0003 = Lift System impact: From Hard Down to Error logging issue. Displayed message : "Limit switch engaged; please call Service" HW code 0000 = LARM 0001 = Pivot 0002 = ARC 0003 = Lift

H-Page, error Code /= , error Text /= , debug Text /= , recovery Class = IH, major Function. DO NOT close H-page case with this error selected. Review the system log and select correct error or abandon case. IH error message not cleared within 2 seconds and not equal to shutdown request. DO NOT close H-page case with this error selected. Review the system log and select correct error or abandon case.

error Code = 50125, hw-status=00A2, error Text = POS TSUI: SMB or SMH error, debug Text += pos-error=4ACA, hw-status=00A2, recovery Class = DO, major Function /= LC Gantry System impact: Permanent command. Displayed message : None. error Code = 50125, error Text = POS TSUI: SMB or SMH error, debug Text += pos-error=4ACA, hw-status=00A2, recovery Class = DO, major Function /= LC Gantry System im

Applies to

Models

Innova

Product

Innova 2000 Innova 2000 systems Innova 2000 systems

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.