GE Healthcare · X-ray VascularInnovaAdvantx30019
Advantx Console displays the error message: Tube Anode Not Rotating: Try Again.
Advantx Console displays the error message
Symptom
Advantx Console displays the error message: Tube Anode Not Rotating: Try Again. EXPOSURE CMND WITHOUT ROTOR ON: No exposure Advantx Console displays the error message: Tube Anode Not Rotating: Try Again EXPOSURE CMND WITHOUT ROTOR ON: No exposure
Error message
30019 AR ECM POWER UNIT and 42C4 : EXPOSURE CMND WITHOUT ROTOR ON 30019 AR ECM POWER UNIT : EXPOSURE CMND WITHOUT ROTOR ON Debug: fct-status=0 hw-status=14 pos-error=42c4 usr-status=0 HWStatus=0014 User=0000 0000 42C4
Applies to
- Models
- Innova, Advantx
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems Advantx, LFX Advantx product line LFX Advantx product line Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)
- Component
- Advantx-E VAMP Advantx-E VAMP Advantx-E VAMP
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.