No gantry motion.
Symptom
No gantry motion. Advantx console displays message"Emergency stop occurred. Press reset button under TSSC to continue". No gantry motion. Advantx console displays message "Emergency stop occurred. Press reset button under TSSC to continue". In Room monitor displays "Emergency Stop Occured". However, pressing the button does not resolve the issue. No gantry motion. Advantx console displays message"Emergency stop occurred. Press reset button under TSSC to continue". In Room monitor displays "Emergency Stop Occured". However, pressing the button does not resolve the issue.
Error message
error Code = 1050179, error Text = EMERGENCY STOP, debug Text = - EMERGENCY STOP OCCURRED. PRESS RESET UNDER TSSC TO CONTINUE (4AED), recovery Class = WR, major Function /= GantryAxis System impact: Gantry lock-up. Displayed message : "Emergency stop occurred: press reset button to continue".
Applies to
- Models
- Innova, Advantx
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- $ IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.