GE Healthcare · X-ray VascularInnova105017910502601050261105026210501031050042
Innova; Table and Gantry will not move by any control.
Symptom
Innova; Table and Gantry will not move by any control. Table and Gantry cannot Move, TSSC prd display: BD Innova; Table and Gantry will not move by any control.
Error message
error Code = 1050179, error Text = EMERGENCY STOP, debug Text = - EMERGENCY STOP OCCURRED. PRESS RESET UNDER TSSC TO CONTINUE (4AED), recovery Class = WR, major Function /= GantryAxis System impact: Gantry lock-up. Displayed message : "Emergency stop occurred: press reset button to continue". 1050260 FRT LARM AXIS SWITCH ENGAGED -Limit switch 2 problem (prd: BC) 1050260 FRT LARM AXIS SWITCH ENGAGED WR GantryAxis No Motion LARM_Limit_Switch 1 0 - Limit switch 2 problem (prd: BC) Z:/heroic/prd_task.c 638 INX100: 1050261 FRT PIVOT AXIS SWITCH ENGAGED (PRD BC) error code 1050261 FRT PIVOT AXIS SWITCH ENGAGED WR GantryAxis No Motion PIVOT_Limit_Switch 1 0 - Limit switch 2 problem (prd: BC) Z:/heroic/prd_task.c 638 MCB prd code BCH is displayed on the MCB is displayed in the error log. The Pivot MCB has a PRD code of BC displayed on it. INX100: 1050261 FRT PIVOT AXIS SWITCH ENGAGED (PRD BC) error code 1050261 FRT PIVOT AXIS SWITCH ENGAGED WR GantryAxis No Motion PIVOT_Limit_Switch 1 0 - Limit switch 2 problem (prd: BC) Z:/heroic/prd_task.c 638 MCB prd code BCH is displayed on the MCB is displayed in the error log. The Pivot MCB has a PRD code of BC displayed on it. 1050261: Front: FRT
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.