GE Healthcare · X-ray VascularInnova
DL Crash/Hung DL Crash/Hung DL Crash/Hung
DL Console locked up.
Symptom
DL Crash/Hung DL Crash/Hung DL Crash/Hung
Error message
DL console was locked into what seemed to be an advanced application and could not get acquisition. All system logs have a gap is data during the time of the lockup. DL console was locked into what seemed to be an advanced application and could not get acquisition. All system logs have a gap is data during the time of the lockup. DL error log, DL event log, DL ServiceLogBook, RTAC ServiceLogBook.
Applies to
- Models
- Innova
- Product
- X Innova 2100 Do not use Innova 2100iq System Innova 2100
- Software
- $ IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.