GE Healthcare · X-ray VascularInnova600402600400
Innova 600402, Extra dose risk.
Symptom
Innova 600402, Extra dose risk. Spectral filtration failure. Restart acquisition (1.4)
Error message
600402 Collimator Spectral Filter warning; and 600400 Collimator Spectral Filter Autocalibration failed 600402 Collimator Spectral Filter warning ; continue May include the following debug text: XRBeamForm Spectral Filter Component(s) Collimator 0 0 Collimator mechanical error (stepping) : prefilter XRBeamForm Spectral Filter Component(s) Collimator 0 0 [XRbeamForm::timerExpiredSpectral] Spectral Filter Mismatch 0 instead of 1 on OpMode 8 XRBeamForm Spectral Filter Component(s) Collimator 600402 Collimator Spectral Filter warning; Continue May include the following debug text: XRBeamForm Spectral Filter Component(s) Collimator 0 0 Collimator mechanical error (stepping) : prefilter XRBeamForm Spectral Filter Component(s) Collimator 0 0 [XRbeamForm::timerExpiredSpectral] Spectral Filter Mismatch 0 instead of 1 on OpMode 8 XRBeamForm Spectral Filter Component(s) Collimator 0 0 Collimator spectral filter selection failed (timeout, mismatch or error on sending) and 600400 Collimator Spectral Filter Autocalibration failed
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Innova Collimator Innova collimator Innova collimator
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.