OrthoMRI Table switch is out of adjustment OrthoMRI Getting bed is unplugged message OrthoMRI Adjusted table switch for…
OrthoMRI Table switch is out of adjustment OrthoMRI Getting bed is unplugged message OrthoMRI Adjusted table switch for proper operation OrthoMRI Escan XQ OrthoMRI Unplugged bed error OrthoMRI 8.2b So…
Symptom
OrthoMRI Getting bed is unplugged message This error is typically the table in switch,which needs adjustment. Second cause is there will be a rut worn in the flooring allowing the table to roll off the switch. Sometimes there is a positioning pad, blanket or other obstruction either on the floor or around/under the coil locking mechanism or under the horseshoe part of the table which traverses in and out of the magnet.
Error message
OrthoMRI Unplugged bed error
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI 8.2b software Revision. OrthoMRI 8.2b software Revision.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.