GE Healthcare · X-ray VascularInnova10501671050607
Innova, AP Detector lift drives to max with enable in single plane mode.
Symptom
Innova, AP Detector lift drives to max with enable in single plane mode. Works fine when in biplane mode.
Error message
1050167 DO GantryAxis Front: FRT 2ND LEVEL BUMP Debug: - FRONTAL COLLISION SENSOR ACTIVATED. CLEAR AND TRY AGAIN (4AE6).1050607 DO GantryAxis Lat: LAT Detector BUMP Debug: - LATERAL DETECTOR COLLISION (T:0x4A12 H:0x808 U:0x0000).
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry 2360911SPARE PART CAPACITIVE SENSOR BOARD 2360911SPARE PART CAPACITIVE SENSOR BOARD
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.