Gantry Failure Call Service, Gantry Moving Slow

Symptom

Error message

50129: POS CSB : WR: antenna electrodes failure:POS ERROR=4ACE:HDW STATUS=0000:USR STATUS=0000 50129: POS CSB : WR: antenna electrodes failure:POS ERROR=4ACE:HDW STATUS=0000:USR STATUS=0000. LEDs lit Cap sensor Module are DS3(yellow), DS6(Red), DS9(Green), DS10(Green). Shows Error code 5. Defect on J9. DS7 the Green standby LED was not on. 50129:POS:WR: antenn aelectrodes failures: POS EROR=4ACE:HDW STATUS=0000: USR STATUS=0000. LEDs lit on the Cap sensor module are DS3(yellow), DS6(red), DS9(green), DS10(green). Shows error code 5. Defect on J9. DS7 the green standby LED was not on.

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems

Component

Positioner Gantry Positioner Gantry Positioner Gantry

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.